Category
Brackets
6 subcategories · 14 manufacturers · 272 parts
Browse Brackets products from leading manufacturers in Hardware & Fasteners.
Brackets
272 results
Hammond ManufacturingRFQ Ready
Brady's High Performance Pipe Markers Are Pre-Coiled For Easy Wrap-Around Installation. High Performance Overlaminated Polyester Construction Seals In And Protects Graphics. Markers Resist Abrasion, Chemicals, High Humidity And Outdoor Weathering.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Brady's High Performance Pipe Markers Are Pre-Coiled For Easy Wrap-Around Installation. High Performance Overlaminated Polyester Construction Seals In And Protects Graphics. Markers Resist Abrasion, Chemicals, High Humidity And Outdoor Weathering.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Brady's High Performance Pipe Markers Are Pre-Coiled For Easy Wrap-Around Installation. High Performance Overlaminated Polyester Construction Seals In And Protects Graphics. Markers Resist Abrasion, Chemicals, High Humidity And Outdoor Weathering.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Bradysnap-On™ Pipe Markers Are Ideal For Indoor And Outdoor Use. May Be Applied To Dirty, Oily, Greasy Or Rough Surfaces. Installs Quickly And Easily In Older Facilities Or New Construction. All Stock Markers Meet Asme (Ansi) Standard. Pipe Markers Are Lightweight And Durable And Can Be Removed And Reapplied In Other Areas.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Bradysnap-On™ Pipe Markers Are Ideal For Indoor And Outdoor Use. May Be Applied To Dirty, Oily, Greasy Or Rough Surfaces. Installs Quickly And Easily In Older Facilities Or New Construction. All Stock Markers Meet Asme (Ansi) Standard. Pipe Markers Are Lightweight And Durable And Can Be Removed And Reapplied In Other Areas.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
The Tp-105 Series Test Point Offers A Functionally Superior Alternative To Other Means Of Board Level Trouble Shooting, Particularly .025" Square Header Posts. While Featuring A Loop Profile For Positive Test Probe Retention, This Product Is Available In Any Combination Of Positions, From One To Forty, At .100" Centers And Fits In The Popular .035" Diameter Hole Size. The Above Board Profile Is Substantially Below That Of Headers And Other Devices Used As Test Points. Thus, A Re-Fit Can Be Accomplished Without Any Printed Circuit Board Layout Re-Design Costs, While Significantly Reducing Test Point Height And Improving Function. Visibility And Identification Are Significantly Enhanced By The Choice Of Ten Standard Colors For The Tp-105 Series, Representing All Of The Variations Of The Industry Color Code. The Tp-105 May Be Purchased Pre-Cut To Any Specified Number Of Positions From One To Forty. Mounting Leg Design Insures Positive Retention In The Circuit Board During Soldering Operations.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Vertical Outlet Strip Mounting Clip - Hammond Manufacturing - 1585clip
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Brady Strap-On Pipe Markers Are Ideal For Indoor And Outdoor Use. May Be Applied To Dirty, Oily, Greasy Or Rough Surfaces. Installs Quickly And Easily In Older Facilities Or New Construction. All Stock Markers Meet Asme (Ansi) Standard. Pipe Markers Are Lightweight And Durable And Can Be Removed And Reapplied In Other Areas.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Bradysnap-On™ Pipe Markers Are Ideal For Indoor And Outdoor Use. May Be Applied To Dirty, Oily, Greasy Or Rough Surfaces. Installs Quickly And Easily In Older Facilities Or New Construction. All Stock Markers Meet Asme (Ansi) Standard. Pipe Markers Are Lightweight And Durable And Can Be Removed And Reapplied In Other Areas.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Brady Strap-On Pipe Markers Are Ideal For Indoor And Outdoor Use. May Be Applied To Dirty, Oily, Greasy Or Rough Surfaces. Installs Quickly And Easily In Older Facilities Or New Construction. All Stock Markers Meet Asme (Ansi) Standard. Pipe Markers Are Lightweight And Durable And Can Be Removed And Reapplied In Other Areas.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Brady Strap-On Pipe Markers Are Ideal For Indoor And Outdoor Use. May Be Applied To Dirty, Oily, Greasy Or Rough Surfaces. Installs Quickly And Easily In Older Facilities Or New Construction. All Stock Markers Meet Asme (Ansi) Standard. Pipe Markers Are Lightweight And Durable And Can Be Removed And Reapplied In Other Areas.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Brady Strap-On Pipe Markers Are Ideal For Indoor And Outdoor Use. May Be Applied To Dirty, Oily, Greasy Or Rough Surfaces. Installs Quickly And Easily In Older Facilities Or New Construction. All Stock Markers Meet Asme (Ansi) Standard. Pipe Markers Are Lightweight And Durable And Can Be Removed And Reapplied In Other Areas.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Bradysnap-On™ Pipe Markers Are Ideal For Indoor And Outdoor Use. May Be Applied To Dirty, Oily, Greasy Or Rough Surfaces. Installs Quickly And Easily In Older Facilities Or New Construction. All Stock Markers Meet Asme (Ansi) Standard. Pipe Markers Are Lightweight And Durable And Can Be Removed And Reapplied In Other Areas.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Bradysnap-On™ Pipe Markers Are Ideal For Indoor And Outdoor Use. May Be Applied To Dirty, Oily, Greasy Or Rough Surfaces. Installs Quickly And Easily In Older Facilities Or New Construction. All Stock Markers Meet Asme (Ansi) Standard. Pipe Markers Are Lightweight And Durable And Can Be Removed And Reapplied In Other Areas.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
Bradysnap-On™ Pipe Markers Are Ideal For Indoor And Outdoor Use. May Be Applied To Dirty, Oily, Greasy Or Rough Surfaces. Installs Quickly And Easily In Older Facilities Or New Construction. All Stock Markers Meet Asme (Ansi) Standard. Pipe Markers Are Lightweight And Durable And Can Be Removed And Reapplied In Other Areas.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
The Tp-105 Series Test Point Offers A Functionally Superior Alternative To Other Means Of Board Level Trouble Shooting, Particularly .025" Square Header Posts. While Featuring A Loop Profile For Positive Test Probe Retention, This Product Is Available In Any Combination Of Positions, From One To Forty, At .100" Centers And Fits In The Popular .035" Diameter Hole Size. The Above Board Profile Is Substantially Below That Of Headers And Other Devices Used As Test Points. Thus, A Re-Fit Can Be Accomplished Without Any Printed Circuit Board Layout Re-Design Costs, While Significantly Reducing Test Point Height And Improving Function. Visibility And Identification Are Significantly Enhanced By The Choice Of Ten Standard Colors For The Tp-105 Series, Representing All Of The Variations Of The Industry Color Code. The Tp-105 May Be Purchased Pre-Cut To Any Specified Number Of Positions From One To Forty. Mounting Leg Design Insures Positive Retention In The Circuit Board During Soldering Operations.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
The Tp-105 Series Test Point Offers A Functionally Superior Alternative To Other Means Of Board Level Trouble Shooting, Particularly .025" Square Header Posts. While Featuring A Loop Profile For Positive Test Probe Retention, This Product Is Available In Any Combination Of Positions, From One To Forty, At .100" Centers And Fits In The Popular .035" Diameter Hole Size. The Above Board Profile Is Substantially Below That Of Headers And Other Devices Used As Test Points. Thus, A Re-Fit Can Be Accomplished Without Any Printed Circuit Board Layout Re-Design Costs, While Significantly Reducing Test Point Height And Improving Function. Visibility And Identification Are Significantly Enhanced By The Choice Of Ten Standard Colors For The Tp-105 Series, Representing All Of The Variations Of The Industry Color Code. The Tp-105 May Be Purchased Pre-Cut To Any Specified Number Of Positions From One To Forty. Mounting Leg Design Insures Positive Retention In The Circuit Board During Soldering Operations.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
The Digi-Klip® Drp Series Of Dual Readout, Free-Standing Card Edge Connectors Represents A Major Advancement In Packaging Technology For The Reliable Mating Of Printed Circuit Boards. At The Heart Of The Drp Design Is Components Corporation's Proven Wire Form Contact Principle, A Patented Contact System Successfully Applied In Single Readout Formats Since 1962. Contact Principle: The Premise Is Simple: To Provide Long Term And Reliable Contact In Demanding Applications, A Card Edge Contact Must Be A Good Spring. The Connector Must Exhibit No Reduction In Pressure Over Years Of Mated Service, And It Must Provide A "wiping Action." The Drp Series Contact, Successor To The Patented Single Readout Digi-Klip, Is Manufactured From The Highest Grade Beryllium Copper Alloy Wire Which Is Heat Treated For Optimum Spring Temper After Forming. Because Of This Design And Process, The Resulting Contact Provides A True Wiping Action Point Contact With Exceptionally High Unit Force. This Allows For A "gas Tight" Mating Junction, Eliminating The Need For Precious Metal Plating In Most Applications. Consistent Contact Normal Forces Are Insured, Regardless Of Time Or Multiple Insertion/Withdrawal Cycles. Components Corporation | Componentscorp.Com Design Flexibility: The Drp Series Is Supplied In Disposable, Molded Carrier Strips To Facilitate Mounting And Positioning During Soldering Operations. Any Combination Of Contact Pairs May Be Applied In .100", .150" Or .156" Increments; Row Spacing Grid Is The Popular .200" For All Types. Contact Pair Deletions May Be Specified Without Cost Premium. The Carrier Strips Are Removed After Soldering And Discarded Or Returned For Credit And Re-Use. Space Savings: The Drp Presents The Lowest Profile Of Any Card Edge Connector System Available Today. Total Slot Depth Is .260" And Module Board "fingers" May Be As Short As .130". Overall Contact Pair Width Is A Mere .270" And .350" With Carrier In Place. Cost Savings: Since The Digi-Klip Design Is Made From A Wire Form, There Is Virtually No Scrap Material Reflected In The Cost Of The Contact. The Exclusive, "gas Tight" Point Contact Eliminates The Need For Precious Metal Plating On The Connector And The Circuit Board Tab. The Versatility Of The Drp Carrier Strip Mounting System, With Its Unlimited Combination Of Contact Pairs, Allows The Designer The Flexibility To Apply Only The Exact Number Of Terminations Necessary; There Is No Need To Specify A "standard" Contact Configuration Which Often Results In Unused Termination Positions. Industry Compatibility: The Digi-Klip Drp Series Conforms To The Popular .200" Row Spacing Grid. This Standardization Allows The Designer The Confidence To Apply The Unique Advantages Of The Drp Series Without The Concern Over Sole Sourcing, And Many Existing Products May Be Re-Designed To Incorporate This Superior Contact System With Minimal Re-Tooling.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
The Digi-Klip® Drp Series Of Dual Readout, Free-Standing Card Edge Connectors Represents A Major Advancement In Packaging Technology For The Reliable Mating Of Printed Circuit Boards. At The Heart Of The Drp Design Is Components Corporation's Proven Wire Form Contact Principle, A Patented Contact System Successfully Applied In Single Readout Formats Since 1962. Contact Principle: The Premise Is Simple: To Provide Long Term And Reliable Contact In Demanding Applications, A Card Edge Contact Must Be A Good Spring. The Connector Must Exhibit No Reduction In Pressure Over Years Of Mated Service, And It Must Provide A "wiping Action." The Drp Series Contact, Successor To The Patented Single Readout Digi-Klip, Is Manufactured From The Highest Grade Beryllium Copper Alloy Wire Which Is Heat Treated For Optimum Spring Temper After Forming. Because Of This Design And Process, The Resulting Contact Provides A True Wiping Action Point Contact With Exceptionally High Unit Force. This Allows For A "gas Tight" Mating Junction, Eliminating The Need For Precious Metal Plating In Most Applications. Consistent Contact Normal Forces Are Insured, Regardless Of Time Or Multiple Insertion/Withdrawal Cycles. Components Corporation | Componentscorp.Com Design Flexibility: The Drp Series Is Supplied In Disposable, Molded Carrier Strips To Facilitate Mounting And Positioning During Soldering Operations. Any Combination Of Contact Pairs May Be Applied In .100", .150" Or .156" Increments; Row Spacing Grid Is The Popular .200" For All Types. Contact Pair Deletions May Be Specified Without Cost Premium. The Carrier Strips Are Removed After Soldering And Discarded Or Returned For Credit And Re-Use. Space Savings: The Drp Presents The Lowest Profile Of Any Card Edge Connector System Available Today. Total Slot Depth Is .260" And Module Board "fingers" May Be As Short As .130". Overall Contact Pair Width Is A Mere .270" And .350" With Carrier In Place. Cost Savings: Since The Digi-Klip Design Is Made From A Wire Form, There Is Virtually No Scrap Material Reflected In The Cost Of The Contact. The Exclusive, "gas Tight" Point Contact Eliminates The Need For Precious Metal Plating On The Connector And The Circuit Board Tab. The Versatility Of The Drp Carrier Strip Mounting System, With Its Unlimited Combination Of Contact Pairs, Allows The Designer The Flexibility To Apply Only The Exact Number Of Terminations Necessary; There Is No Need To Specify A "standard" Contact Configuration Which Often Results In Unused Termination Positions. Industry Compatibility: The Digi-Klip Drp Series Conforms To The Popular .200" Row Spacing Grid. This Standardization Allows The Designer The Confidence To Apply The Unique Advantages Of The Drp Series Without The Concern Over Sole Sourcing, And Many Existing Products May Be Re-Designed To Incorporate This Superior Contact System With Minimal Re-Tooling.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
The Digi-Klip® Drp Series Of Dual Readout, Free-Standing Card Edge Connectors Represents A Major Advancement In Packaging Technology For The Reliable Mating Of Printed Circuit Boards. At The Heart Of The Drp Design Is Components Corporation's Proven Wire Form Contact Principle, A Patented Contact System Successfully Applied In Single Readout Formats Since 1962. Contact Principle: The Premise Is Simple: To Provide Long Term And Reliable Contact In Demanding Applications, A Card Edge Contact Must Be A Good Spring. The Connector Must Exhibit No Reduction In Pressure Over Years Of Mated Service, And It Must Provide A "wiping Action." The Drp Series Contact, Successor To The Patented Single Readout Digi-Klip, Is Manufactured From The Highest Grade Beryllium Copper Alloy Wire Which Is Heat Treated For Optimum Spring Temper After Forming. Because Of This Design And Process, The Resulting Contact Provides A True Wiping Action Point Contact With Exceptionally High Unit Force. This Allows For A "gas Tight" Mating Junction, Eliminating The Need For Precious Metal Plating In Most Applications. Consistent Contact Normal Forces Are Insured, Regardless Of Time Or Multiple Insertion/Withdrawal Cycles. Components Corporation | Componentscorp.Com Design Flexibility: The Drp Series Is Supplied In Disposable, Molded Carrier Strips To Facilitate Mounting And Positioning During Soldering Operations. Any Combination Of Contact Pairs May Be Applied In .100", .150" Or .156" Increments; Row Spacing Grid Is The Popular .200" For All Types. Contact Pair Deletions May Be Specified Without Cost Premium. The Carrier Strips Are Removed After Soldering And Discarded Or Returned For Credit And Re-Use. Space Savings: The Drp Presents The Lowest Profile Of Any Card Edge Connector System Available Today. Total Slot Depth Is .260" And Module Board "fingers" May Be As Short As .130". Overall Contact Pair Width Is A Mere .270" And .350" With Carrier In Place. Cost Savings: Since The Digi-Klip Design Is Made From A Wire Form, There Is Virtually No Scrap Material Reflected In The Cost Of The Contact. The Exclusive, "gas Tight" Point Contact Eliminates The Need For Precious Metal Plating On The Connector And The Circuit Board Tab. The Versatility Of The Drp Carrier Strip Mounting System, With Its Unlimited Combination Of Contact Pairs, Allows The Designer The Flexibility To Apply Only The Exact Number Of Terminations Necessary; There Is No Need To Specify A "standard" Contact Configuration Which Often Results In Unused Termination Positions. Industry Compatibility: The Digi-Klip Drp Series Conforms To The Popular .200" Row Spacing Grid. This Standardization Allows The Designer The Confidence To Apply The Unique Advantages Of The Drp Series Without The Concern Over Sole Sourcing, And Many Existing Products May Be Re-Designed To Incorporate This Superior Contact System With Minimal Re-Tooling.
Traceable · Quote request
Hammond ManufacturingRFQ Ready
The Digi-Klip® Drp Series Of Dual Readout, Free-Standing Card Edge Connectors Represents A Major Advancement In Packaging Technology For The Reliable Mating Of Printed Circuit Boards. At The Heart Of The Drp Design Is Components Corporation's Proven Wire Form Contact Principle, A Patented Contact System Successfully Applied In Single Readout Formats Since 1962. Contact Principle: The Premise Is Simple: To Provide Long Term And Reliable Contact In Demanding Applications, A Card Edge Contact Must Be A Good Spring. The Connector Must Exhibit No Reduction In Pressure Over Years Of Mated Service, And It Must Provide A "wiping Action." The Drp Series Contact, Successor To The Patented Single Readout Digi-Klip, Is Manufactured From The Highest Grade Beryllium Copper Alloy Wire Which Is Heat Treated For Optimum Spring Temper After Forming. Because Of This Design And Process, The Resulting Contact Provides A True Wiping Action Point Contact With Exceptionally High Unit Force. This Allows For A "gas Tight" Mating Junction, Eliminating The Need For Precious Metal Plating In Most Applications. Consistent Contact Normal Forces Are Insured, Regardless Of Time Or Multiple Insertion/Withdrawal Cycles. Components Corporation | Componentscorp.Com Design Flexibility: The Drp Series Is Supplied In Disposable, Molded Carrier Strips To Facilitate Mounting And Positioning During Soldering Operations. Any Combination Of Contact Pairs May Be Applied In .100", .150" Or .156" Increments; Row Spacing Grid Is The Popular .200" For All Types. Contact Pair Deletions May Be Specified Without Cost Premium. The Carrier Strips Are Removed After Soldering And Discarded Or Returned For Credit And Re-Use. Space Savings: The Drp Presents The Lowest Profile Of Any Card Edge Connector System Available Today. Total Slot Depth Is .260" And Module Board "fingers" May Be As Short As .130". Overall Contact Pair Width Is A Mere .270" And .350" With Carrier In Place. Cost Savings: Since The Digi-Klip Design Is Made From A Wire Form, There Is Virtually No Scrap Material Reflected In The Cost Of The Contact. The Exclusive, "gas Tight" Point Contact Eliminates The Need For Precious Metal Plating On The Connector And The Circuit Board Tab. The Versatility Of The Drp Carrier Strip Mounting System, With Its Unlimited Combination Of Contact Pairs, Allows The Designer The Flexibility To Apply Only The Exact Number Of Terminations Necessary; There Is No Need To Specify A "standard" Contact Configuration Which Often Results In Unused Termination Positions. Industry Compatibility: The Digi-Klip Drp Series Conforms To The Popular .200" Row Spacing Grid. This Standardization Allows The Designer The Confidence To Apply The Unique Advantages Of The Drp Series Without The Concern Over Sole Sourcing, And Many Existing Products May Be Re-Designed To Incorporate This Superior Contact System With Minimal Re-Tooling.
Traceable · Quote request
...
No part selected